A strong point in favour of
the subject of this chapter is that it can be moved without any trouble if
the photographer has to change his quarters.
The foundation, so to speak, of the developing sink is a common wooden
washstand of the kind which has a circular hole in the top to hold the
basin. A secondhand article of this sort can be purchased for a shilling or
two. A thoroughly sound specimen should be selected, even if it is not the
cheapest offered, especial attention being paid to its general rigidity and
the good condition of the boards surrounding the basin shelf.
[Illustration: Fig. 11.--A home-made developing sink for the darkroom.]
The area of the top is generally about 20 by 15 inches; but if a stand of
larger dimensions can be found, choose it by preference.
The general design of the sink and its equipment is shown in Fig. 11. For
the uprights, which rest on the beading of the washstand, use two boards 9
inches wide, 1/2 inch (actual) thick, and 36 inches long. The top shelf, to
carry the pail or other water container, should be of 1-inch stuff; and the
two lower shelves be not more than 5 inches wide and 3/4 inch thick.
Pages:
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39