It is very useful
for slotting sheet brass and tubes, slotting small shafts, nicking
screws, etc. Being quite small it has the advantage of having few
teeth to keep in order, and it may be made harder than those of larger
diameter. A series of them, varying in diameter from one eighth to
three eighths of an inch, and varying considerably in thickness, will
be found very convenient.
These cutters or saws, with the exception of the smaller one, may be
used to the best advantage in connection with a saw table, like that
shown in Fig. 8. This is a plane iron table having a longitudinal
groove in its face to receive the guiding rib of the carriage, shown
in Fig. 9, and a transverse groove running half way across, to receive
a slitting gauge, as shown in Fig. 8. The table is supported by a
standard or shank, which fits into the tool-rest socket. The saw
mandrel is supported between the centers of the lathe, and the saw
projects more or less through a slot formed in the table. The gauge
serves to guide the work to be slotted, and other kinds of work may be
placed on or against the carriage, shown in Fig. 9.
It is a very simple matter to arrange guiding pieces for cutting at
any angle, and the saw table may be used for either metal or wood. The
saws for wood differ from those used for metal; the latter are filed
straight, the former diagonally or fleaming.
Pages:
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73